

Mainly used for furnace heat test, heating test and other battery safety performance detection.
- Programmable temperature control with automatic temperature compensation.
- Explosion-proof pressure relief structure and over-temperature protection.
- Forced horizontal air circulation for uniform heat distribution.
Número de artículo :
GT-I13Pedido (cantidad mínima de pedido) :
1
The GT-I13 Thermal Abuse Case Stress Test Chamber is designed to evaluate the thermal safety performance of batteries and battery packs through controlled high-temperature exposure. It is mainly used for furnace heat tests and heating tests to assess battery behavior under specified thermal conditions.
The chamber provides an adjustable temperature range of RT+10°C to 150°C, with a configurable heating rate of 5±2°C/min. Its PID temperature control system maintains stable test conditions, while the explosion-proof pressure relief structure and multiple safety protection features help reduce risks during testing. It is suitable for battery manufacturers, electronics laboratories and quality control facilities conducting thermal abuse evaluations.
· Adopts PID control system, intuitive and easy to operate, with full automatic constant temperature and rapid temperature compensation function.
· Equipped with over-temperature protection and automatic power-off system for over-load.
· New high temperature resistant long-shaft motor.
· Four casters at the bottom for easy moving and fixing.
· Circulation system: forced horizontal air supply circulation.
· Heating system: PID+SSR.
· Timing function: power-off and alarm indication when the set temperature is reached and the holding time is elapsing.
GB 31241 – Safety Requirements for Lithium-Ion Batteries and Battery Packs for Portable Electronic Products
IEC62133 – Safety Requirements for Portable Sealed Secondary Lithium Cells and Batteries.
UL1642 – Standard for Lithium Batteries.
GB 38031 – Safety Requirements for Traction Batteries of Electric Vehicles.
Fully charge the battery according to the specified test method and place it in the test chamber. The test chamber heats up at a rate of (5±2)℃/min, and maintains a constant temperature of 130℃±2℃ for 30 minutes after reaching the temperature.
Acceptance Criterion: The battery shall not catch fire or explode.
|
Model |
GT-I13 |
|
Temperature range |
RT+10~+150℃ (adjustable at will, 130℃ for common use) |
|
Temperature deviation |
±2.0℃ (no-load) |
|
Temperature accuracy |
±0.5 °C |
|
Temperature rise rate |
5°C ± 2°C/min (linearly adjustable) |
|
Storage shelf |
Load capacity ≥30Kg; 1 shelf provided, made of SUS201 stainless steel |
|
Inner chamber material |
SUS304 stainless steel |
|
Sealing strip |
Corrosion-resistant silica gel |
|
Temperature controller |
Ambient temperature RT+10℃~150℃ Temperature rise rate: 5±2℃/min (linearly configurable) Temperature fluctuation: 0.5℃ Temperature uniformity: ±2℃ |
|
Timing setting |
99H59M59S can be set |
|
Cooling method |
Natural cooling |
|
Heating material |
Stainless steel finned nickel-chromium alloy heat dissipation tubes, which are pollution-free and have a long service life |
|
Sensor |
K-type high-precision temperature sensor |
|
Controller |
Installed on the upper part of the equipment; equipped with stainless steel luxury handle and explosion-proof door lock catch |
|
Inner chamber material |
SUS201 stainless steel; the inner cavity is clean and smooth, easy to clean without residue, and has strong corrosion resistance. All internal materials are low-pollution, and the inner barrel is fully welded by seamless argon arc welding |
|
Outer chamber material |
SECC steel plate, 1.5mm thick, with fine powder baking finish |
|
Observation window |
double tempered glass observation window, size 250*250*5 mm |
|
Insulation material |
The insulation layer of the entire inner chamber is 100MM thick, adopting fire-resistant high-strength PU polyurethane foam insulation material (with better heat insulation and fire resistance than ordinary PU); insulation coefficient: <0.0212kcal/m∙hr |
|
Circulation system |
Special moisture-proof and heat-dissipating design; stainless steel extended shaft circulation motor equipped with high and low temperature resistant aluminum alloy multi-wing fan blades |
GESTER – Battery Testing Equipment Manufacturer
GESTER provides testing equipment for material, product and battery safety performance evaluation.
For the Thermal Abuse Case Stress Test Chamber GT-I13, customers can obtain support throughout the equipment purchasing and application process:
- Manufacturing & Assembly: Equipment production and assembly with attention to chamber construction and component configuration.
- Product Development: Technical development to support different testing requirements.
- Calibration Support: Temperature measurement and calibration support according to applicable procedures.
- Technical Assistance: Guidance on equipment operation, test settings and routine maintenance.
- Customization: Technical discussions on chamber configurations and customer-specific requirements.
Contact our team to discuss your battery thermal abuse testing requirements and equipment configuration.
The Thermal Abuse Test Chamber GT-I13 is mainly designed for thermal abuse testing of lithium-ion batteries and battery packs. The specific sample size and configuration should be confirmed before ordering.
Yes. The chamber supports temperatures up to 150°C and can be configured for the typical 130°C±2°C test condition with a heating rate of 5±2°C/min.
The timer supports settings up to 99 hours, 59 minutes and 59 seconds. For the typical thermal abuse procedure, the holding time is 30 minutes.
It includes over-temperature protection, automatic power-off protection against overload, an explosion-proof pressure relief device, an exhaust system and an explosion-proof door locking structure.
Yes. The chamber features a double-tempered-glass observation window and internal LED lighting, allowing operators to monitor the sample during testing.
The Battery Thermal Abuse Test Chamber has internal dimensions of 500 × 500 × 500 mm and one adjustable shelf with a maximum load capacity of 30 kg. Please provide your battery dimensions and test fixture requirements for configuration evaluation.
Simulación climática de alta precisión para pruebas de fiabilidad de materiales y componentes electrónicos -Esta cámara de temperatura y humedad constante cuenta con control programable, amplios rangos de temperatura y humedad, y cumple con las normas internacionales. Características principales:✔ Amplio rango de pruebas: Temperatura: -60 °C a +150 °C | Humedad: 20 % a 98 % HR.✔ Control inteligente: controlador con pantalla táctil a color programable de 7 pulgadas y exportación de datos USB.✔ Componentes de primera calidad: Equipado con compresor Tecumseh francés importado.✔ Normas internacionales: Cumple plenamente con las normas ISO, ASTM, IEC, JIS y BS.
Cámara de prueba de temperatura y humedad de sobremesa Ofrece un control ambiental preciso mediante ajustes estables de temperatura y humedad para el acondicionamiento de muestras antes de las pruebas. Su diseño compacto permite colocarlo fácilmente sobre un soporte o mesa de trabajo, lo que resulta ideal para laboratorios y áreas de ensayo con espacio limitado, sin comprometer la calidad de fabricación ni el rendimiento de las pruebas.
Cámara de pruebas de choque térmico Consta de dos compartimentos independientes. La máquina de choque térmico o el material que se está probando se coloca en una cesta o bandeja de prueba y luego se transfiere entre las cámaras caliente y fría. El proceso de transferencia es rápido, lo que garantiza cambios de temperatura veloces que simulan condiciones reales. Esto permite a los fabricantes evaluar el impacto de las diferencias de temperatura en la integridad, el rendimiento y la fiabilidad del producto.
Cámara de prueba de alta y baja temperatura Son dispositivos diseñados específicamente para simular entornos de temperaturas extremas, tanto altas como bajas, lo que permite evaluar la durabilidad, la funcionalidad y el rendimiento de materiales y componentes tras una exposición prolongada. Ideales para pruebas de durabilidad de materiales en aplicaciones electrónicas, aeroespaciales e industriales.
Cámara de pruebas ambientales transitableAdecuado para materiales de instrumentación de prueba, electricistas, productos electrónicos, electrodomésticos, autopartes, recubrimientos químicos, diversos componentes electrónicos y partes de otros productos relacionados que se almacenan y transportan en ambientes de alta y baja temperatura. La prueba de adaptabilidad se utiliza para evaluar sus índices de rendimiento.
Cámara de prueba de niebla salina Es fundamental para evaluar la resistencia a la corrosión de metales, recubrimientos y otros materiales, garantizando que los productos cumplan con estrictas normas de resistencia a la corrosión y mejorando su fiabilidad en aplicaciones reales.
La cámara de pruebas a prueba de explosiones para sobrecarga y sobredescarga de baterías GT-I08 es un recinto de pruebas de seguridad especializado diseñado para evaluar el rendimiento de la batería en condiciones extremas de carga y descarga. Características principales:✔ Sistema integral de protección de seguridad✔ Gestión precisa de la temperatura✔ Diseño estructural duradero a prueba de explosiones✔ Monitoreo de seguridad en tiempo real✔ Amplia compatibilidad y fácil manejo
Esta máquina de prueba de caída de baterías es adecuada para realizar pruebas de caída libre de pequeños productos y componentes electrónicos de consumo, como teléfonos móviles, baterías de litio para teléfonos móviles, walkie-talkies, diccionarios electrónicos, teléfonos de intercomunicación de edificios, reproductores de CD/MD/MP3, etc. Pruebas de precisión, impulsando la seguridad.• Control de caída preciso• Mejorar la seguridad de la batería• Resultados de pruebas fiables• Fácil de usar y con control inteligente.
GESTER es el fabricante de la máquina profesional de prueba de penetración de clavos para baterías.
Esta máquina de prueba de penetración de baterías está diseñada para simular condiciones en las que diversos tipos de baterías se ven sometidas a la penetración de objetos punzantes durante su uso, transporte, almacenamiento o eliminación como residuos domésticos. La batería se considera apta si no se produce ninguna explosión o incendio durante la prueba. EstándaresGB/T 18332.2, QC/T 743, YDT 2344.1, YDT 2344.2, QC/T 744
La máquina integrada de compresión y acupuntura de baterías inspecciona el rendimiento de seguridad de la batería mediante la prueba de compresión o la prueba de acupuntura, y evalúa el resultado de la prueba a través de datos de prueba en tiempo real (como el voltaje de la batería, la temperatura máxima de la superficie de la batería y los datos de vídeo de la presión).
dejar un mensaje
Escanea y envíalo a WeChat. :
Escanea y envíalo a WhatsApp. :